Need a screwdriver
As some of you will know I am trying to sort a leak on our motorhome. I have noticed that the majority of the fittings are secured using whats looks to be some kind of security headed screws. Does anyone have a name for these or if you can get hold of a screwdriver, or bit, to fit them??
Replies to This Discussion
-
Permalink Reply by Edwin Prigmore on -
Are they square looking screws? If so any auto parts stores will have bits and drivers for them. Ed
-
Permalink Reply by Michael Gardiner on -
If they are square -no problem ,almost any store ,Sears ,HomeDepot,Lowes. will have them---another from the 60-70's almost looks like a bowtie ---------used on every fitting in my Starcraft from 1977-a bit harder to find,have a original screwdriver from back then--that fits soooo much better than the newer versions( that are also more pointed and need to be touched on a grinder wheel to be made a bit flat).
-
Permalink Reply by Becky Blanton on
-
Can you post a photo of them?
-
Permalink Reply by VK on -
Clutch heads? As above, they look like bow ties...Ace hardware can get you a bit.
-
Permalink Reply by Dean Inskip on -
Yeah they do look like a bow tie.
About
Latest Activity
kinda look like mine winne when i got it but try this out mine had turnmites in it at one time mine sat not being used from 1995 got it back in jan the first thang i done was to strip the hole inside carpet seats i do mean the only thang left was 4…
ongoing changes and progress of the restoration
almost done all the lace curtains, won't be hung until we replace the carpet, countertop, and wash the walls
I will be doing the same, so I priced everything out and have found that Canadian Tire has the cheapest foam matresses which can be cut to size. We found some nice upholstery fabric at fabricland for $8/meter, but some nuetral stuff for $2/meter. We…
belive it or not down hear in fl thay are selling for 500.00 up to 1000.00 runing i just got tow of them for 500.00 each one runing with new brakes but has a hole in roof the other has been guted but needs a balest rester for it to run i thank and t…
Need to replace all cushions. Any advice on the cheapest way to do this. Also, recommendations on what type foam and fabrics are needed.
Badge
© 2010 Created by Pat Daly on Ning. Create a Ning Network!
